Manufacturers and die & mold shops can eliminate chatter problems in countless milling operations with Iscar's new Chatterfree carbide endmill. The cutters' variable-pitch flute pattern banishes harmonic vibration, the foremost source of chatter. This facilitates faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling. In addition, customers also report prolonged edge life due to reduced chatter. The chatter-free ability is presented in both solid carbide endmills and tips in Iscar's MULTI-MASTER replaceable-tip line. Diameter range is 6 to 20mm for the solid carbide endmills, and 8 to 20mm for MULTI-MASTER tips. These unique endmills are ideal for reduced power machines with ISO40 or BT40 adaptations. The solid carbide construction can deal with full slot machining up to 2xD. Depth capability on the replaceable-tip variant is more restrained since the active length is shorter. In full slotting applications on alloy steel, the solid carbide version conveniently handles 0.03-0.05 feed rates at 180-220mm/min surface speed and 2xD depth of cut.

FINISHRED - Revolutionary Solid Carbide Endmills

Iscar is releasing the EFR.. B44 and the MM EFS.. Finishred a revolutionary solid carbide endmill family. The Finishred carbide endmill is a mixture of both roughing and finishing endmills in a single tool. Roughing endmills remove material from work pieces more quickly and proficiently than typical endmills. Nonetheless, roughing endmills leave grooves on the machined surface. Consequently, after using a roughing endmill, a finishing endmill has to be used in order to obtain a smooth surface finish. This means time-consuming tool change, setup time and inevitably of maintaining two endmill types in the inventory.

Features of the Finishred Endmills:

The EFR.. B44 and the MM EFS.. endmills feature four flutes with 45 degree helix, 2 serrated flutes and 2 continuous flutes.

The cutting edges of the finishing flutes are radially farther from the tool axis than the cutting edges of the serrated flutes. The finishing flutes remove the grooves caused by the roughing flutes, leaving a smooth surface finish.

The tool is fully effective and enables running at rough machining parameters, ending in finish surface quality.

The unique tool design moderates vibration at high load applications.

The tool generates short and long chips concurrently. This chip mixture is evacuated more efficiently than each individual chip type, an exceptional solution in slotting and cavity milling applications.

The Finishred is also available with the Multi-Master indexable milling head option which merges the Finishred features with the benefit of little setup time, no regrinding costs and the wide range of shank and extension choices are available for the Multi-Master milling heads.

A single tool substitutes the roughing and finishing endmills; therefore downsizing stock.

Tool change and setup time can be discarded.

An extra tool position is acquired on the machine

New Chip Splitting Solid Carbide Endmills for High Metal Removal Rates

ISCAR is introducing the ECP-3/4L family of chip splitting endmills. The new endmills are attainable with three and 4 38 degree flutes in grade IC900. They feature 2xD and long shanks with downsized neck diameter, which allow machining along high shoulders, at high feeds. These endmills, due to their chip splitting function and force distribution can be used very efficiently on low power machines (CAT40/BT40/ISO40). The serrated cutting edge features flat peaks which leave a better surface finish, in comparison to the current rougher carbide endmill. The ECP endmills are suggested for machining austenitic and martensitic stainless steel, at up to 2xD depth of cut. They can be used on alloyed steel as well. All of the preliminary tests conducted at many customers' locations showed exceptional results.

New End Mills Coming From Iscar Can Enhance Productivity While Reducing Costs
Manufacturers and die & mold shops can banish chatter problems in numerous milling operations with Iscar's new Chatterfree end mills. The cutters' variable-pitch flute pattern eliminates harmonic vibration, the primary source of chatter. This enables faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling.

Iscar Adds Their Latest Innovations To A Extended Line Of Outstanding Hole Making Solutions
Iscar recently released several different drilling innovations to meet their customers needs. These new products are Sumocham Drill, DR-DH and Deep Drills. Drawing off of their experience Iscar has come up with new and innovative ways to increase productivity for the end user.

Iscar Recently Releases Numerous New Lines To Continue Their Family Of Milling Cutters
Iscar recently released a new family of High Speed Milling adjustable endmills and facemills that will improve milling of aluminum, non-metallics, cast iron and hardened steel. This should prove especially useful in the automotive and aerospace industries.

A Couple Of The Several Improvements In Carbide Inserts Coming From Iscar Over The Years
Iscar is introducing a new unique milling system with tangential, clamped, butterfly-shaped LNKX carbide inserts. The butterfly-shaped insert has significant advantages compared to the current flat, square shapes. The new geometry has more cutting edges, positive rake face, reduced cutting forces resulting in higher performance.

Several Advancements Have Multiplied Iscar's Families Of Indexable Endmills For Elevated Productivity
Helido-Upfeed 04 Two years ago Iscar introduced the extremely efficient H600 indexable endmill line, based on conceptually new Helido-Upfeed double sided inserts with 6 cutting edges. The first insert launched was the H600 WXCU 0806..., which was designed for milling cutters in the diameter range of 50 to 125 mm.

Push Pull Testing For Building Industry Supplying Calibrated Gauges. Mechanical Load Testing Methods For On Site Documentation To Testing Standards.
Push Pull Testing for the Railway industry for proof of reliable anchor fixings. Calibrated push pull force gauges are used for stress load testing along with tensile strength pull testing procedures. Proof of load testing undertaken, measured, recorded in a reliable and standard way to BS5080 Part 1 standards.

Modern Car Manufacturing Jobs To Help Save The Economic State
The global recession the economy is experiencing in the past few years have pushed major companies to close down and stop their operations.

Graduate Career At Land Rover And Jaguar.
Even if there is no formal education in medical school, new graduates planning to pursue such graduate careers can undergo training to cover the basics in health care to learn the non-specialized functions of the medical doctor.

Look Out For Automotive Manufacturing Jobs.
There is no point in denying that workers serving in the automotive industry are also suffering from the economic recession that everybody is experiencing world wide.